Main Inspection & Testing Check List

[samil]

Dear All

I am newish inspector and tester. but originally I have got Electrical Engineering Diploma.
so I know quite a lot about electricity.
I do the inspection and tesing generally for domestic and business places.
So please could any body let me know the check list which could be used against during the test.

Many Thanks

samil

[Jimbo]

Samil, first off the form will ask all the required measurements. If you start from the supply, first off man protective device then earthing arrangement, tail size, main switch to con unit, type of protective devices in the con unit, type of wiring and method, rcd times, Ze and Zs at finals.IR results etc etc. The list goes on and on but I am sure you get the idea. As I said get the form its really just fill it in as you go, no blanks are allowed to be left on a form so you will quickly pick whats wanted and whats not. Regards Jimbo

[samil]

Thank you very much for replying Jimbo
I was just thinking, if we could get a list of things which would be chekced against.
for example cpc size for a specific circuit and another things checked against the expected result.
this way it will be easy to past or fail.

regards

samil

[solo3uk]

If you want a comprehensive list of items to be checked according to the IEE, get GUIDANCE 3, Inspection Testing and Certification, where you will find everything that should be tested.............mind you there are so many you`ll have to use common sense and check the most important items otherwise you`ll be a month in one single job.

[Knipex]

Are you refering to a checklist of items to test?
There are specific tests that need to be carried out in a specific order. If you cannot remember the order just look at the "Schedule of test results" page of the EIC. Each test is listed in order from left to right

Edited

Sorry after reading the post I think I can see what your saying.
I dont think you can create a quick and easy checklist, and would you really want to?
At the end of the day its your name on the report so I think you should be thorough

[vima]

I'm an Electrical engineer.i know about the testing because i worked as a testing engineer in a capacitor manufacturing company.
______________________
Vimal

Sreevysh Corp (http://www.sreevyshcorp.in)

[Jimbo]

I'm an Electrical engineer.i know about the testing because i worked as a testing engineer in a capacitor manufacturing company.
______________________
Vimal

Sreevysh Corp (http://www.sreevyshcorp.in)


Vima. you got me there what has your occupation got to do with the question??? and what has working in a capacitor manufacturing company got to do with Inspection and Test????.
Regards Jimbo